Bolt-On Hooks

KBOGH/BoltOnHooks LLC is now offering G70 4,700lb rated forged Bolt-On Grab Hooks™ and laser cut Bolt-On Clevis Mounts™ that are MIG welded to a 1/4″ laser cut plate, they also include the grade #8 mounting hardware needed to bolt them to your bucket or other equipment. These are perfect for use with G70 5/16″ chains that’s commonly used with small to medium sized Compact Utility Tractors and Sub Compact Utility Tractors.

Please be advised these are not recommended for double walled heavy duty buckets (please read the FAQ page for more info).

Enclosed

  • (1)-Bolt On 5/16” Grade #70 Grab Hook or Clevis/Shackle Mount
  • (2)-1.5” long Grade #8 1/2”-13 bolts
  • (4)-1/2” SAE washers (the smaller diameter ones)
  • (2)-1/2” USS washers (the larger diameter ones)*
  • (2)-1/2”-13 Nylock Grade #8 nuts

* Not included if Backing Plates or Combo’s are purchased

Tools needed for install

  • Drill
  • Measuring tools
  • Small round file or de-burring tool (Now available from us!)
  • 1/4” drill bit*
  • 1/2” drill bit* (Now available from us!)
  • Wrenches/Sockets, 3/4” size

* Or a “Unibit” capable of drilling a 1/2” hole.

Bolt-On Grab Hook™ with Hardware

5/16″ Chain Size, 4,700lb WLL
Fabricated in the USA
Now Zinc Chromate Plated!
Use with 5/16″ or 3/8″ chain (see the FAQ Page)

*Sold Individually*

Sold Out Till 8/31/20 (estimated)

$24.00
SKU: BOGH
Grab Hook/Clevis Combo

For Mounting Back-to-Back on a single walled bucket.
*Only two 1-1/2″ Bolt Sets included*
*Shackle Sold Separately*

*Sold Individually*

Sold Out Till 8/31/20 (estimated)

$44.00
SKU: BOGH/CM Combo
Heavy Duty Backing Plates

Optional Backing Plates for Heavy Duty Applications,  like tractors over 35 HP and 1500+ pound lifting capacity.

Made in the USA

Now Zinc Chromate Plated!

*Sold Individually*

$4.00
SKU: BOBP
XL Backing Plate

For JD buckets with the two extra mounting holes on top.
Drilled for our Bolt-On Products

Made in the USA

Video posted on our YouTube Channel!

*Includes two bolt sets*

$20.00
SKU: XLBP
2″ Wide Spacer/Backing Plate

Needed for most smaller Massy machines if BOGH/CM Combo’s are used. The DL95 loader in particular, maybe others from Mahindra too.

*1-3/4″ bolts included only when combo’s are purchased vs. the 1-1/2″ ones, needed only if you add these as spacers*
Now Zinc Chromate Plated!

$4.00
SKU: 2″ BOBP

Installation Tools

Menu