Outlet Store

For a limited time only, while supplies last, KBOGH/BoltOnHooks LLC is offering a variety of Bolt-On Grab Hooks™ and Bolt-On Clevis Mounts™ and other items at a discounted price. These products are what we consider “blems” or “seconds” and may be unfinished raw parts, have plating that is blotchy or outgassed from crevices, and/or small weld defects that do not affect the structural integrity of the parts whatsoever and are considered cosmetic in nature only. When the parts disappear from this page it means stock is depleted. Please check back frequently as inventory is constantly changing.

Parts are sold “as-is” with only a structural warranty.

Plated Bolt-On Grab Hooks™

These mostly have finish problems were the plating turned blotchy, or outgassed from small crevices. Some may have ugly welds, and/or small weld defects, but perfectly functional (and safe). A few have one wider than normal weld that may interfere with the SAE washers. Sold WITHOUT hardware, available separately below.

Plated Bolt-On Grab Hooks™ for Kubota, Option #1

These mostly have finish problems were the plating turned blotchy, or outgassed from small crevices. Some may have “ugly” welds as well, but perfectly functional (and safe). Sold with proper length hardware, drill guide, and a backing plate. Order a Clevis Mount (without hardware) from above if available or the Bolt-On products page to make them into Option #2’s (please let me know if you don’t need/want the backing plates).

Bolt Sets for the BOGH and BOCM

Bolt Sets for the BOGH and BOCM above (if available), includes the following:

  • (2)-1.5” long Grade #8 1/2”-13 bolts (1.75″ for the Kub Shim Set)
  • (4)-1/2” SAE washers (the smaller diameter ones)
  • (2)-1/2” USS washers (the larger diameter ones)
  • (2)-1/2”-13 Nylock Grade #8 nuts
Bolt Set Pair

2 bolt sets for BOGH or BOCM above.

  • (2)-1.5” long Grade #8 1/2”-13 bolts
  • (4)-1/2” SAE washers (the smaller diameter ones)
  • (2)-1/2” USS washers (the larger diameter ones)
  • (2)-1/2”-13 Nylock Grade #8 nuts
$4.00
SKU: BOLTPAIR
Blem Kubota Square Back Shim / Bolt Set

Add this Bolt / Shim set to our Blemished Bolt-On Grab Hooks or Clevis Mounts to fit the Kubota Square Back Buckets as described HERE.

  • (2)-1.75” long Grade #8 1/2”-13 bolts
  • (4)-1/2” SAE washers (the smaller diameter ones)
  • (2)-1/2” USS washers (the larger diameter ones)
  • (2)-1/2”-13 Nylock Grade #8 nuts
  • Steel Shim / Spacer

Weldable Clevis Mount for 3/4″ Sized Shackles

These were cut to fast on the laser cutter so the cut lines are very rough. We clean up the outside edges on the belt grinder but they still can have a rough appearance-otherwise perfectly functional.

Menu