1/4″ NPT Threads
Made in the USA
**Does not replace OEM couplers**
KBOH/BoltOnHooks LLC is now offering a limited selection of hydraulic products like pressure test gauges, quick disconnect couplings, protective caps, sleeving products, and now a custom Diverter Valve kit and Crossover Relief Valve. Please check back frequently as we are trying to expand this product line as time and demand allows, also feel free to contact us for any products or machines you don’t see listed below.
For the Mid and/or Rear SCV(Remote) connections on the following machines:
1/4″ ISO 5675 “AG” Type |
JD 1023E | JD 2305 | JD 2720 | JD 4100 | JD 425 | |
---|---|---|---|---|---|---|
JD 1025/6R | JD 2320 | JD 2025R | JD 4110 | JD 445 | ||
JD 2210 | JD 2520 | JD 2032R | JD 4115 | JD 455 | ||
JD 3025E | JD2038R | MF GC1705 (pre 8/2017) |
All JD X-Series |
1/2″ ISO 5675 “AG” Type |
JD 3×20 | JD 4×00# | JD 3032/38E* | JD 4044/52/66M* | ||
---|---|---|---|---|---|---|
JD 4×20 | JD 3033/39/46R* | JD 4044/52/66R* | ||||
JD 4×10 |
3/8″ ISO 5675 “AG” Type |
MF GC1705 (post 8/2017) |
MF GC1723 | ||||
---|---|---|---|---|---|---|
MF GC1710* | MF GC1725 | |||||
MF GC1720* |
3/8″ ISO 7241 “B” Type |
JD 790*# | JD 4×00# | KUB L2501 (F) | KUB L3600 (F) | ||
---|---|---|---|---|---|---|
JD 990# | KUB L3301 (F) | KUB L3800 (F) | ||||
KUB L3901 (F) |
3/8″ ISO 7241 “A” Type |
KIO CK25 | KIO NX5510 | NH TC40DA | KUB L4701 | LS 2025H (F) | BRSN 4520 (F) |
---|---|---|---|---|---|---|
KIO CK27 (F) | KIO LK3054 | MF 1526 | ||||
KIO CK35 | KIO CX2510 |
For the Power Beyond connections on the following machines:
1/2″ ISO 5675 “AG” Type |
JD 1023E | JD 2305* | JD 3×20 | JD 790*# | ||
---|---|---|---|---|---|---|
JD 1025/6R | JD 2025R(GEN2) | JD 4×20 | JD 990*# | |||
JD 2210* | JD 2032R(GEN2) | JD 4×10* | JD 2038R |
3/8″ ISO 7241 “B” Type |
JD 2320 | JD 2025R(GEN1) | JD 4100 | |||
---|---|---|---|---|---|---|
JD 2520 | JD 2032R(GEN1) | JD 4110 | ||||
JD 2720 | JD 4115 |
*=Not Verified Yet, Please Verify/Email Us
#=Depends on Serial Number, Please Verify/Email Us
**All information above is provided to the best of our ability to verify information.**
1/4″ NPT Threads
Made in the USA
**Does not replace OEM couplers**
1/4″ NPT Threads
Made in the USA (or Italy).
**Does not replace OEM couplers**
1/2″ NPT Threads
Made in the USA
**Does not replace OEM couplers**
1/2″ NPT Threads
Made in the USA
**Does not replace OEM couplers**
3/8″ NPT Threads
Made in the USA
**Does not replace OEM couplers**
3/8″ NPT Threads
Made in Italy
**Does not replace OEM couplers**
3/8″ NPT Threads
Made in Italy
**Does not replace OEM couplers**
Female Rubber Caps Snap Onto ISO 5675 Male QD Tips
Made in the USA
Male Rubber Plugs Snap Into ISO 5675 Female QD’s
Made in the USA
12″ extension hoses for 1 or 2 -Series John Deere tractors with Mauser (or other) cabs installed. Allows easier loader / blade / blower hose hookups. Set of 4 (four) complete with 1/4″ ISO 5675 “AG” style Male / Female couplers on 1/4″ hoses.
Built to order, may take extra time to ship.
Replacement fittings for the John Deere front Quick Hitch angle cylinder that are commonly damaged by snow / ice buildup in the frame of the hitch. Always keep a spare set of these on hand for your 54″ plow! These style fittings require no threads tapes or sealants.
Includes one each:
1/4″ JIC Male x 1/4″ JIC Female Swivel 90°
1/4″ JIC Male x #4 SAE/ORB Male 90°
10 each of 4 colors:
Black
Blue
Yellow
Red
8″ x .180″ * Premium Nylon * 50lb tensile strength * Made in the USA
-10ml Bottle
-Made in the USA
-Used on NPT threads up to 2″
-This is the same stuff we use in our shop!
-Perfect for small projects!
-Sets in 30 minutes, full cure in 24 hours.
For Bundling and Protecting Hoses
Sold by the foot, change the quantity before adding to the cart.
Black Only
Dura-Wrap© is the perfect solution for organizing and controlling cables and hoses that are subject to constant exposure. This sleeving is made from one of the strongest materials known, ballistic nylon. The tightly woven nylon is paired with an industrial hook and loop closure to provide a durable and flexible sleeving that’s super easy to install.
Dura-Wrap© is ideal for keeping wires or hoses together or covering chains and hoses to protect the surfaces they run across. The sleeve provides the best abrasion resistance and water repellence when compared to other nylon sleevings.
The flexibility featured by Dura-Wrap© makes it easy to install over single or multiple hoses without having to disconnect them. The high strength and durability also help to protect operators or other personnel safe from high-pressure fluids that may be traveling in the hoses.
Model MP310
Made in the USA by Precision Manufacturing INC
Use with 1/4″ or 3/8″ hoses.
Protect your hydraulic hoses with the TAMEit™! The TAMEit™ will lift up the hoses to clear any pinch points and will flex to allow full movement of the hoses without overstretching them.