Quick Coupler Help

What Coupler/Tool do I need?

In addition to the tables below, you can download these files and print them to compare to the couplers you have. Tool and coupler sizes are NOT actual measurements of the outside of coupler itself, it refers to the “Body Size” or internal passages of the coupler.

For the Mid and/or Rear SCV(Remote) connections on the following machines:
**Will not connect to Single Point Hydraulic Couplers (SPHC)**

1/4″
ISO 5675
“AG” Type
JD 1023E JD 2305 JD 2720 JD 4100 JD 425
JD 1025/6R JD 2320 JD 2025R JD 4110 JD 445
JD 2210 JD 2520 JD 2032R JD 4115 JD 455
JD 3025E JD2038R MF GC1705
(pre 8/2017)
All JD
X-Series
1/2″
ISO 5675
“AG” Type
JD 3×20 JD 4×00# JD 3032/38E* JD 4044/52/66M*
JD 4×20 JD 3033/39/46R* JD 4044/52/66R*
JD 4×10
3/8″
ISO 5675
“AG” Type
MF GC1705
(post 8/2017)
MF GC1723
MF GC1710* MF GC1725
MF GC1720*
3/8″
ISO 7241
“B” Type
JD 790*# JD 4×00# KUB L2501 (F) KUB L3600 (F)
JD 990# KUB L3301 (F) KUB L3800 (F)
KUB L3901 (F)
3/8″
ISO 7241
“A” Type
KIO CK25 KIO NX5510 NH TC40DA KUB L4701 LS 2025H (F) BRSN 4520 (F)
KIO CK27 (F) KIO LK3054 MF 1526 BRSN 6530
KIO CK35 KIO CX2510 KIO CS2220

Please email us if you need the 3/8″ 7241 “A” style couplers for a gauge setup, we do have them.
(F) Means Female Coupler Required on Gauge (contact us if needed, we’ll build it for you)

For the Power Beyond connections on the following machines:

1/2″
ISO 5675
“AG” Type
JD 1023E JD 2305* JD 3×20 JD 790*#
JD 1025/6R JD 2025R(GEN2) JD 4×20 JD 990*#
JD 2210* JD 2032R(GEN2) JD 4×10* JD 2038R
3/8″
ISO 7241
“B” Type
JD 2320 JD 2025R(GEN1) JD 4100
JD 2520 JD 2032R(GEN1) JD 4110
JD 2720 JD 4115

*=Not Verified Yet, Please Verify/Email Us
#=Depends on Serial Number, Please Verify/Email Us

**All information above is provided to the best of our ability to verify information.**