Corner Animation

Hook and Clevis Mount

Kioti w/Stump

Hanging SnowBlower

JD4700 w/Stump

Travis in KY



Matt's Clevis


Gregs 2520 Header Picture

Hydraulic Tools

KBOGH/BoltOnHooks LLC is now offering a limited selection of hydraulic products like pressure test gauges, quick disconnect couplings, protective caps, sleeving products, and now a custom Diverter Valve kit and Crossover Relief Valve. Please check back frequently as we are trying to expand this product line as time and demand allows, also feel free to contact us for any products or machines you don't see listed below.


What coupler do I need?

In addition to the charts below, you can download these files and print them to compare to the couplers you have:

Connector Sizes
Connector Profile Chart
DHH Connector Chart


For the Mid and/or Rear SCV(Remote) connections on the following machines:
ISO 5675
"AG" Type
1023E 2305 2720 4100 425  
1025/6R 2320 2025R 4110 445 All
2210 2520 2032R 4115 455 X-Series
3035E   2038R MF GC1705    

ISO 5675
"AG" Type
3x20 4x00# 3032/38E* 4044/52/66M*    
4x20   3033/39/46R* 4044/52/66R*    

ISO 7241
"B" Type
790*# 4x00# KUB L2501 (F) KUB L3600 (F)    
990#   KUB L3301 (F) KUB L3800 (F)    
      KUB L3901 (F)    

ISO 7241
"A" Type
KIO CK25 KIO NX5510 NH TC40DA KUB L4701 LS 2025H (F) BRSN 4520 (F)
KIO CK27 (F) KIO LK3054        
KIO CK35 MF 1526        
-->Please email us if you need the 3/8" 7241 "A" Coupler<--
-->(F) Means Female Coupler Required on Gauge (contact us if needed, we'll build it for you)<--

For the Power Beyond connections on the following machines:
ISO 5675
"AG" Type
1023E 2305* 3x20 790*#    
1025/6R 2025R(GEN2) 4x20 990*#    
2210* 2032R(GEN2) 4x10* 2038R    

ISO 7241
"B" Type
2320 2025R(GEN1)   4100    
2520 2032R(GEN1)   4110    
2720     4115    

*=Not Verified Yet, Please Verify/Email Us
#=Depends on Serial Number, Please Verify/Email Us


->Common Thread Sizes<-
Common Thread Sizes

->Click any picture for full size view<-

->Watch the Pressure Test Gauge Video Below<-

WGH Vertical Compare WGH Horiz Compare 5/16 WGH on Plate


*A $13.50 fee is added in the cart to all orders for USPS Priority Shipping in the United States.*

Please read the FAQ page for Canadian/International Orders.


Most of the products on this page will fit into a USPS Small Flat Rate Box,
so we will refund $5.50 for reduced shipping fees if we can use one.

Hydraulic Pressure Test Gauge


The Hydraulic Pressure Test Gauge is used to test pressures in most compact tractors and equipment. The 2.5", 0-5000 psi liquid filled gauge is graduated in 100 psi increments for easy readings, and the 30" hose allows you to place the gauge in a convenient location while testing.

Available with or without couplers, this gauge is assembled and ready to use, no more shopping at various sources and paying extra shipping to piece a kit together yourself.

Hydraulic Pressure Test Gauge

2.5" Liquid Filled 0-5000PSI Gauge
30" Long Super-Flexible Hose
Male Coupler of your choice Included
(See Dropdown-->>)
Completely Assembled, Ready to Use.

Now includes FREE protective cap
QC Size:


->Watch the Pressure Test Gauge Video Below<-

The "Waite" Hydraulic Decompression Tool

The original "Waite Tool" is made to relieve pressure in hydraulic lines by clamping onto the male Quick Disconnect tip, the large wingnut is then turned to press in the ball or poppet of the tip while directing the pressurized fluid away from the user. This tool is safer than any other method and eliminates the risk of potentially deadly fluid injection into the skin.

Here is the original story in part as published in the 2005 - Volume #29, Issue #5, Page #39 Farm Show Magazine:

Simple Tool Solves Hydraulic Pressure Problems

A simple tool invented (and patented) by George Waite makes releasing pressurized hydraulic couplers as easy as turning on a water faucet. Waite's Hydraulic Pressure Relief Tool works like pliers to grip the valve end. Turn a simple tap on one side of the pliers, and it slowly presses on the male fitting, gradually releasing pressure as needed. The controlled release keeps fluid from shooting all over you and the equipment and prevents damage to the coupler.
"You can release pressure and fluid into a Dixie cup with this tool," says Waite. "You don't have to try to unscrew the hose or force the coupler." A universal reaction from people who see the patent pending tool for the first time is "'Why didn't I think of that?,'" says Waite. The next question is, "Where can I get one?" One such person, Roger Hessler, a Colorado State Transportation Dept. worker and a personal friend of Waite, saw him fiddling with a wooden mockup.
"He said he wanted one," recalls Waite. "I said, you don't even know what it is and he replied, yes, I do. I've been looking for one for 40 years. I just didn't know what it was going to look like."
Hessler showed a working model to his boss, who promptly ordered 100 of the tools. Waite also received the 2005 Colorado Dept. of Transportation Safety and Innovation Award for his invention.

While George no longer makes the tools himself, they are still proudly Made in the USA in Colorado.

Waite Tool

Waite Tool

Currently avaible in these sizes, we may add more if requested:
• 1/4" Fits Male ISO 5675 "AG" Style Couplers, Ball or Poppet
• 3/8" Fits Male ISO 7241 "B" Style Couplers, Ball or Poppet
• 1/2" Fits Male ISO 5675 "AG" Style Couplers, Ball or Poppet
• 3/8" FF Fits Male Flat Face Style Couplers (AKA "Skid Steer" Style)
• 1/2" FF Fits Male Flat Face Style Couplers (AKA "Skid Steer" Style)

The Waite

Choose size from dropdown ->
Select Size:


$55.00 each

->Watch the Waite Tool Video Below<-