Corner Animation

Hook and Clevis Mount

Kioti w/Stump

Hanging SnowBlower

JD4700 w/Stump

Travis in KY



Matt's Clevis


Gregs 2520 Header Picture

Weld-On Products

KBOGH/BoltOnHooks LLC is now offering Grade-70 Weldable Grab Hooks in both 5/16" and 3/8" sizes for those who would rather weld hooks onto their buckets or equipment. These are the very same hooks sold by other popular online retailer's. The 5/16" hooks have a *WLL of 4,700lbs, and the 3/8" hooks have a *WLL of 6,600lbs.

We also offer the Clevis/Shackle Mounts in a weldable version as well. The clevis/shackle mounts will work perfectly with ropes, straps and slings if you prefer not to use chains with your machine. The center hole is sized for 1/2" body clevis/shackles (sold separately). They are perfect for welding to trailers or equipment to create anchoring or lifting points. They have a *WLL of 4,000lbs.

In addition to the weldable hooks and clevis/shackle mounts, we also offer laser cut reinforcement plates in two sizes to further strengthen your installation. These are clean and ready to weld, they don't even have any dreaded mill-scale on them!

*Working Load Limit.

->Click any picture for full size view<-

WGH Vertical Compare WGH Horiz Compare 5/16 WGH on Plate


*A $12.00 fee is added in the cart to all orders for USPS Priority Shipping in the United States.*

Please read the FAQ page for Canadian/International Orders.


Some of the products on this page will fit into a USPS Small Flat Rate Box,
so we will refund $6.00 for reduced shipping fees if we can use one.

5/16" WGH

5/16" G70 Weldable Grab Hook

4,700 *WLL


5/16" WGH

$5.50 each


Small Blank Plate
Small Blank Plate

Used for 5/16" Hooks and Clevis Mounts

1/4" Thick, 3.38" Long, 2.63" Wide



$3.50 each


3/8" WGH

3/8" G70 Weldable Grab Hook

6,600lb *WLL


3/8" WGH

$8.50 each


Large Blank Plate
Large Blank Plate

Used for 3/8" Hooks

1/4" Thick, 4.00" Long, 2.25" Wide



$3.50 each


Weldable Clevis Mount Clevis Print

Weldable Clevis Mount

1/2" Thick

4000lb *WLL



$5.00 each


5/8" D-Ring

5/8" Weldable D-Ring

6,130lb *WLL

Unfinished, may have light surface rust.


5/8" DRing

$9.00 each


Weld-On Anchor Hook

Perfect for FEL, Backhoe, and Excavator Buckets

Slightly Curved Base Measures 3-3/4" x 1"

2,200lb *WLL



$35.00 each


1/2" Screw Pin Shackle
Screw Pin Shackle in 1/2" Size

4,000lb *WLL


1/2" SPS

$6.00 each


*WLL=Working Load Limit