BoltOnHooks LLC / KBOH-USA® is now offering G70 4,700lb rated forged Bolt-On Grab Hooks™ and laser cut Bolt-On Clevis Mounts™ that are MIG welded to a 1/4″ laser cut plate, they also include the grade #8 mounting hardware needed to bolt them to your bucket or other equipment. These are perfect for use with G70 5/16″ chains that’s commonly used with small to medium sized Compact Utility Tractors and Sub Compact Utility Tractors.
Bolt-On Hooks
Bolt-On Grab Hook™ with Hardware
5/16″ Chain Size, 4,700lb WLL
Made in the USA with USA Forged Grab Hooks!
Use with 5/16″ or 3/8″ chain (see the FAQ Page)
*If using on an EA Wicked Bucket, please put a note on the checkout page.
*Sold Individually*
Bolt-On Clevis Mount™ with Hardware
Accepts 1/2″ Shackles, 4,700lb WLL
Made in the USA
AKA “Pad Eyes”
NEW updated Gen2 model, now has more clearance to the shackle body.
*Shackle Sold Separately*
*If using on an EA Wicked Bucket, please put a note on the checkout page.
*Sold Individually*
Grab Hook/Clevis Combo
For Mounting Back-to-Back on a single walled bucket.
One 5/16″ BOGH, one Gen2 BOCM, and two 1-1/2″ Bolt Sets included
*Shackle Sold Separately*
*If using on an EA Wicked Bucket, please put a note on the checkout page.
*Sold Individually*
Bolt-On Clevis Mount™ without Hardware
For adding to your existing Bolt-On Hooks purchased previously. No bolts included!
Made in the USA
NEW updated Gen2 model, now has more clearance to the shackle body.
*Shackle Sold Separately*
*Sold Individually*
Heavy Duty Backing Plates
Optional Backing Plates for Heavy Duty Applications, like tractors over 35 HP and 1500+ pound lifting capacity.
Made in the USA
*Sold Individually* *Only fits Hooks / Clevis’ purchased from boltonhooks.com (KBOH)
XL Backing Plate
For JD buckets with the two extra mounting holes on top.
Drilled for our Bolt-On Products
Made in the USA
Video posted on our YouTube Channel!
*Includes two bolt sets*
2″ Wide Spacer/Backing Plate
Needed for most smaller Massy machines if BOGH/CM Combo’s are used. The DL95/FL1805 loaders in particular, maybe others from Mahindra too.
Now Zinc Chromate Plated!
1/2″ Bolt On D-Ring
4,000lb *WLL
Silver Zinc Plated
May be Welded
*Bolts NOT included*
Imported
1/2″ USA Made Screw Pin Shackle
3 Ton (6,000lb) *WLL
Fits our BOCM’s (Pad Eyes), Hook/Clevis Combos, and Option #2 Kubota Hooks Perfectly!
Made in the USA by Columbus McKinnon®
Orange Powder Coated for better visibility.
1/2″ Screw Pin Shackle
4,000lb *WLL
Fits our BOCM’s (Pad Eyes), Hook/Clevis Combos, and Option #2 Kubota Hooks Perfectly!
Imported
Installation Tools
NOGA® Deburr Set
# NG8000
Comes with ten N1 Blades
Professional Quality Handle and Blades
Ormadus / Fastenal Step Bit
Ormadus® (formally Rock River) by Fastenal® Step bit
3/16″, 1/4″, 5/16″, 3/8″, 7/16″, and 1/2″ Steps
1/4″ Maximum Material Thickness